Denzel 27301, Руководство пользователя, Страница: 11 / 28

11
CIRCULAR SAW
EN
ATTENTION!
Circular saws use power cord with mounting type Y: for security it must be replaced by authorized
repair shop personnel.
Possible faults
Fault Probable cause Elimination method
The tool does not turn on.
Broken power cord or mounting
wire, power cord malfunction.
Call the service center.
Faulty switch. Call the service center.
Brush wear. Call the service center.
Formation of a circular light
on the collector.
Fault in the armature winding. Call the service center.
Wearout /”hang ” of brushes. Call the service center.
When working smoke or smell
of burning insulation is generated
from the vent.
Interturn closure of armature
or stator windings.
Call the service center.
Malfunction of the electrical part
of the instrument.
Call the service center.
Increased machine vibration.
Damage or deformation
of the sole. Call the service center to replace
the sole.
Faulty or improperly installed saw
blade.
Replace or reinstall a saw blade.
Maintenance is carried out in specialized service centers. The list of service centers is presented on the website
http://ipsremont.ru/kontakty/.
RECYCLING
A tool, developed a designated service life, must be recycled according the rules established by environmental
and other laws of the country, where the tool is operated.
STORAGE
During the assigned service life, store the machine in a dry heated room. Recommended storage temperature
is from 0 °C to +40 °C. Store the tool in the original packaging.
Before placing the drill in storage remove the working tool.
TRANSPORTATION
During the transportation direct exposure of precipitation, direct sunlight, heat and shock is not allowed.
Transportation should be carried out only in the original packaging at temperature from - 20 °С to + 40 °С.