Denzel 27301, Руководство пользователя, Страница: 3 / 28

3
CIRCULAR SAW
EN
PROPER USAGE AND GENERAL INFORMATION
Electrical circular saw (hereinafter referred to as "saw", "machine", "tool") is designed to perform longitudinal
and transverse straight cuts, cuts at an angle in wood and made of wood materials.
The machine is designed for usage at the environment temperature from 0 °С to +40 °С, relative humidity
not more than 80% and absence of direct exposure of atmospheric condensation and excessive air dustiness.
The machine is suitable only for private use and must be used in intermittent duty not more than 20 hours per
month. It is recommended to use on-loading not more than a nominal, during 10-15 minutes and then to have
a break for 20-30 minutes. This usage mode enables to complete domestic tasks effectively and prevents the tool
from a premature coming out of order.
This manual contains the information and the requirements necessary and sufficient for a sure, effective
and secure use of the tool.
Due to ongoing activities in order to improve the tool the manufacture reserves the right to make minor changes
in its construction not mentioned in this manual and not worsening its consumer and operational properties,
effective and secure use.
ACCESSORIES
Contents of delivery:
1.
Circular Saws 1 pc.
2. Allen key 1 pc.
3. Edge guide 1 pc.
4. Saw blade for wood (installed on saw) 1 pc.
5. Carbon brush kit 1 pc.
6. Instruction manual with warranty card 1 pc.
7. Box 1 pc.
SPECIFICATIONS
Тable 1
Parameter Value
Input power, W 1200
Disk diameter, mm 165
No-load speed, min
-1
5500
Cutting depth at 90 ° , mm 55
Cutting depth at 45 ° , mm 36
Range of angular position of the base, degree 0…45
Base material Steel
Spindle lock +
Protection against accidental starting +
Laser –
Vacuum port +
Inner diameter of disk, mm 20
The number of teeth of the disk 18
The thickness of the disk on the working part, mm 3