© The voltage change over panel is located on the inside (right side) of the control
box. Remove the protecting cover of the voltage change over panel first.
©Select the desired output voltage by connecting the change over cables as shown in
the figure in the previous page.
© A s the final step, close the control panel on the control box.
[Note]
Improper connection of the change over cables, it may result in burning of
the generator.
In changing the output voltage, tighten the locking nuts securely. Note that
insecure tightening of the nuts may result in burning.
Close the control panel to prevent the hazard during operation.
-
2 7
-
