- 87 -
11.
Long-term
storage
When
the
machine
is
to
be
stored
for
a
long
period
of
time,
choose
a
cool
place
free
from
moisture
and
dust,
and
observe
the
following
points.
(1)
Remove
dirt
clinged
the
machine
and
clean
it
thoroughly.
If
painting
is
peeled
off,
it
should
be
repaired.
(2) Remove
the
battery
from
the
machine.
The
battery
should
be
charged
completely
before
it
is
stored.
- Battery
is
discharged
of
itself.
Recharge
it
once
a
month.
(3)
If
any
defects
are
found,
check
and
repair
the
machine
so
that
it
can
be
used
for
future
operation.
(4) For
details
of
handling
the
engine,
refer
to
the
instruction
manual
for
the
engine
provided
separately.
WARNING
Stacking
■
Improper stacking of machines may cause
falling or dropping accidents.
When stacking other machines on this machine,
be sure to observe the following points.
* Check that the bonnet of the machine is free from
damage and that the fixing bolts are not loosened
and missing.
* Put the machine horizontally on a solid foundation
which withstands the weight of stacked machines.
* Machines can be stacked up to 2 stages. The weight
and size of stacked machines should be less than
those of this machine.
* Using square timbers as shown below, put each
machine making sure that the weight is even.
■
Do not operate the machines in the state of stacking to
prevent falling or dropping accidents.
Содержание DCA-150LSKE
