background image

REQUIRED FIELDS:

Name

Enter a name for the extension being created. Example: John Smith.

E-mail

Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected]

Department

Department to which extension will belong to. Example: Sales.

Click on the Save button.

Registering Phone

This chapter describes how to register Denwa phone using Hostname or IP Address.

Hostname or IP Address

Login to phone web administration interface

Open a new browser window and enter your phone IP address in order to access the phone

web administration interface login screen. Example: http://192.168.1.22

Login to phone web administration interface with your username and password. Please note,

factory default login details are username: admin and password: admin.

Click on VOIP.

Enter or set the following details into the respective fields.

REQUIRED FIELDS:

Server Address

Enter the Hostname or IP Address of the PBXware.

- Example for Hostname: voip.bicomsystems.com

- Example for IP Address: 192.168.1.10

Authentication User

PBXware extension number. Example: 1003

Authentication Password

Содержание DW-610P













Отзывы: