Denwa Communications DW-610P, Руководство по настройке

Страница: 10 / 12

Example for IP Address using HTTP or HTTPS: 192.168.1.10/prov
Example for Hostname using TFTP: voip.bicomsystems.com
Example for IP Address using TFTP: 192.168.1.10
Protocol Type
Choose what server type you intend to use: HTTP, HTTPS and Trivial FTP. NOTE: Our
■
recommendation is to use the HTTP.
Update Mode
Set to Update After Reboot.
Click on Apply button. Confirm with Return link.
■
Click on Reboot at the top navigation menu.
■
Click Reboot button and confirm to reboot the phone.
■
You'll have to wait couple of seconds for the configuration to be updated. NOTE: Do not power
■
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
■
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Configure BLF
This chapter describes how to configure BLF (Busy Lamp Field) for Denwa W-610P.
The following topics are covered:
- Extension Settings
- Phone Settings