Config Encrypt Key
Input the Encrypt Key, if the configuration file is
encrypted.
Common Config
Encrypt Key
Input the Common Encrypt Key, if the Common
Configuration file is encrypted
Save Autoprovision
Information
Save the username and password authentication message
of http/https/ftp and input ID message in the phone until
the URL in the server changes
DHCP Option Setting
DHCP Option Setting Specify DHCP Option. DHCP option supports DHCP custom
option and DHCP option 66 and DHCP option 43 to obtain
the parameters. You could choose one method among
them
，
the default is DHCP option disable.
Custom DHCP Option A valid Custom DHCP Option is from 128 to 254. The
Custom DHCP Option must be in accordance with the one
defined in the DHCP server.
Plug and Play
Enable PnP
Enable PnP by selecting it, than the phone will send SIP
SUBSCRIBE messages to a multicast address when it boots
up. Any SIP server understanding that message will reply
with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request
their configuration.
PnP Server
Specify the PnP Server
PnP Port
Specify the PnP Server
PnP Transport
Specify the PnP Transfer protocol
PnP Interval
Specify the Interval time, unit is hour
Phone Flash
Server Address
Set FTP/TFTP/HTTP/HTTPS server IP address for auto
update. The address can be IP address or Domain name
with subdirectory.
Config File Name
Set configuration file’s name which need to update.
System will use MAC as config file name if config file name
keep blank. For example, 000102030405.
。
Protocol Type
Specify the Protocol type FTP
、
TFTP or HTTP.
Update Interval
Specify update interval time, unit is hour.
Update Mode
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
TR069 Settings
