10
2.
Connect the audio sources (Including DVD, VCDR, CAMCORDER
and PC) to the proper AUDIO input jacks ‘L’ and ‘R’.
3.
Connect the video source to the VIDEO jack by RCA cable.
4.
If the video source has a SCART output jack, you can connect the
signal to the monitor by the SCART cable.
5.
Connect the video source to the S-VIDEO input jack of the monitor by
the S-video cable (Pretending that the video source has S-video
output jack).
6.
Insert the AC power to the DC adaptor, then connect 12V input jack
from the monitor to it’s DC output jack.
7.
When using the LCD as a computer screen, connect the PC to the
VGA jack from the monitor by the relevant cable.
8.
If the video source has a HDMI output jack, you can connect the
signal to the monitor by the HDMI cable.
IV. TV/Monitor screen operation
(1) Basic
operation
1. Press
the
POWER
button on the unit or the
STANDBY
button on the
remote control to switch on the power, the indication light will be in blue
color . Press the
POWER
or
STANDBY
button again to switch off the
power, and the light will be in red color.
2. The Picture setup, Sound setup, Previous channel can be memorized
before you switch off the TV/Monitor. The TV/Monitor will re-start under
the previous state when you switch on it again.
3. Press
the
VOL -
or
VOL +
button to adjust the volume output. Press
the
VOL -
button repeatedly to decrease the volume; press the
VOL +
button repeatedly to increase the volume from 0 to 100.
(2) View the TV plays.
1. Press
the
INPUT
button on the remote control to select the TV function
mode. Channel ‘1’ will appear on the right top corner after channel
searching is completed Press the
CH-
or
CH+
button to select the
previous or next channels; or press the
0-9
buttons to enter a channel
number directly, or press the -/-- button until the screen display ‘-’ or ‘--’,
