Denver TCU-86, Руководство пользователя

Страница: 24 / 38

CD/MP3/WMA OPERATION
1.Set function switch to CARD/USB/CD status.
2.Open the disc compartment and place the disc, close the
compartment and the disc will start playing automatically.
3.Press PLAY/PAUSE to control PLAY/PAUSE mode,
press continuously, to shift between play and pause.
4.Turn volume button to adjust the sound volume.
5.Press DIR+ to play next track, hold DIR+ to
convert to fast forward read the inner track.
6.Press DIR- to play previous track, hold DIR- to
convert to fast backward read the inner track.
7.Press STOP key to stop playing.
8.Press MODE to select the repeat mode when playing CD
disc. ( REP RND NORMAL)
9.Press MODE to select the repeat mode when playing
MP3/WMA.When the player stop in MP3/WMA mode,
press and hold MODE key for 3 seconds to enter
selection status of folder, press DIR+ or DIR- to
play selected folder during the LCD flicker. ( REP
ALBUM RND NORMAL)
10.Press PROG to start program play when stopping;
hold PROG to delete all program information.
11. programmable CD memory.
USB/CARD OPERATION
1.Set function switch to CARD/USB/CD status.
2.Insert CARD/USB/CD memorizer to CARD/USB/CD
socket.
3.Press PLAY/PAUSE to control PLAY/PAUSE mode.
Hold PLAY/PAUSE for 1 to 3 seconds to change from
CD playing to USB/CARD media playing. USB/CARD
will play automatically when search thefile.
4.Turn volume button to adjust the sound volume.
5.Press STOP key to stop playing.
6.Press DIR+ to play next track.
7.Press DIR- to play previous track.
20
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent
solution. Do not use strong solvents such as alcohol,
benzine or thinner.
To clean the heads and tape paths
IMPORTANT
Make sure that function is set to TAPE before connecting
the AC cord or inserting batteries.
CAUTION
Use only the supplied AC cord. Use with other cords may
result in the risk of fire.
Using on batteries
Open the lid of the battery compartment on the rear and
Insert ten (size D) batteries, not supplied, with the and
marks correctly aligned, then close the lid.
To switch from AC power supply to battery power supply,
disconnect the AC cord from the AC inlet.
The batteries need to be replaced when:
The tape speed slows down, volume decreases, or sound
Is distorted during operation.
Notes on batteries
• Do not mix different types of batteries or old batteries
with new ones.
• Never recharge the batteries, apply heat to them or take
them apart.
• Remove dead batteries.
If liquid leaks from the batteries, wipe thoroughly to
remove.
Safe use and care of your audio equipment
We have designed and made this audio equipment to meet
European safety standards, but as with any electronic
equipment you must take care to stay safe and get the
best results.
Here is some good advice to help you do this &
read these instructions carefully before you try to use the
audio equipment.
Protect the mains lead. You must make sure the mains
lead cannot be walked on, crushed, chafed, cut, and so on.
Avoid harsh conditions such as wet or damp places,
high humidity, strong vibration,
extremely high or low temperatures, strong sunlight and
places that are very dusty.
Never let anyone, push objects into holes and ventilation
slots.
Don't continue to use the appliance if you have spilt liquids
in it, if it is damaged in any way
or if it does not work normally. Immediately unplug the
audio equipment and get expert advice.
This product is only designed for household or similar
general use. Any other use may
invalidate the guarantee and might be dangerous.
Batteries
Remove batteries when the appliance is not to be used for
a long time. Batteries left in equipment may cause damage
through deterioration and corrosive leakage, invalidating
the guarantee.
To protect the environment please use local recycling
facilities for battery disposal.
Important Safety warnings
• To prevent electric shock, do not remove any cover.
• If anything goes wrong, don't try and fix it yourself, get a
qualified service agent to look at it.
•
Do not expose this equipment to dripping or splashing or
place any objects filled with liquids, such as vases, on
the equipment.
•
Never put a naked flame source on or near the equipment.
• Never operate the equipment while driving a vehicle.
GB-3
B SAFETY INFORMATION
C POWER SUPPLY
D MAINTENANCE
E CD OPERATION
After every 10 hours of use, clean the Recording heads
and Playback head , the pinch roller and capstan Use a
cotton swab 5 slightly moistened with cleaning fluid or
denatured alcohol.