English - 2
AC OPERATION
Before operation please be sure that the VOLTAGE on the set corresponds to the VOLTAGE of your
local area. Unravel the AC Line Cord, insert one end into the AC jack on the set, and the other end
into a standard AC outlet.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the BATTERY COMPARTMENT DOOR and insert UM-
2/ “C” size x 8 batteries (not supplied) making sure that the indicated battery polarity is observed.
RADIO OPERATION
Slide the FUNCTION switch to the “RADIO” position. Slide the BAND switch to the desired
waveband. Turn the TUNING KNOB to your desired radio station. Adjust the sound level by
rotating the VOLUME CONTROL KNOB. To turn off the radio, simply slide the FUNCTION SWITCH
to “TAPE” position.
FM STEREO INDICATOR
When tuned to a FM stereo broadcast the “FM ST.” LED indicator will light up. In weak signal areas
the FM Stereo signal may not be strong enough and can cause excessive background noise. In this
case, switch to the “FM” position.
ANTENNAS
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit
has a built-in antenna, turn the whole unit for best reception.
BASS BOOST
For increased bass at all volume levels, push the BASS BOOST BUTTON to “ON” to boost the low
frequency tone for an emphasized bass sound. To release the super bass, simply push this button
once again.
CASSETTE OPERATION
TAPE PLAYBACK
Depress the STOP/EJECT BUTTON to open the cassette door. Insert a cassette tape into the
CASSETTE COMPARTMENT and push the cassette door to close. Slide the FUNCTION SWITCH to
TAPE position. Depress the PLAY BUTTON. Adjust the VOLUME CONTROL KNOB to your desired
listening level. To stop the tape, depress the STOP/EJECT BUTTON.
Fast Forward and Rewind
The tape can be fast FORWARDED or REWOUND by depressing the FAST FORWARD BUTTON or
REWIND BUTTON respectively.
Pause Function
During playback or recording, the tape can be stopped temporarily by depressing the PAUSE
BUTTON. To continue playback or recording, press the PAUSE BUTTON once again.
