English - 4
REPEAT MODE
1.
REPEAT 1:
When the REPEAT BUTTON is pressed once, the REPEAT LED INDICATOR will light and flash
continuously. This single track of music will be repeated.
2.
REPEAT ALL:
When the REPEAT BUTTON is pressed twice, the REPEAT LED INDICATOR will stay lit. The
whole disc can be played continuously.
3.
TO CANCEL THE REPEAT FUNCTION
Press the REPEAT BUTTON until the lighted REPEAT LED INDICATOR is turned off .
SKIP AND SEARCH MODE
1.
During play or pause mode, when CD SKIP FORWARD “>>” or CD SKIP BACKWARD “<<”
Button is pressed once, it will go to the next track or go back to the beginning of the track.
2.
During play mode, when CD SKIP FORWARD “>>” or CD SKIP BACKWARD “<<” BUTTON is
pressed and held, it will search the track with audible high speed forward or backward
playback.
Program Mode
1.
During the CD STOP mode, press the PROGRAM BUTTON once. The PROGRAM LED
INDICATOR will light up and blink continuously while the LED DISPLAY will show the number
of Program to be memorized starts from first program “01” and blink continuously as well.
Press the CD SKIP FORWARD “>>” or CD SKIP BACKWARD “<<” BUTTON to your desired
musical track, the CD LED DISPLAY will show the appropriate track number. Press the
PROGRAM BUTTON to store the desired track in memory.
2.
Repeat above procedure until all desired tracks have been programmed. A total of 20 tracks
can be stored in memory. After complete programming, LED DISPLAY will show “01” again and
flash continuously.
3.
To start the PROGRAMMED playback, press the CD PLAY/PAUSE BUTTON once.
4.
To check the program you have stored after complete programming, press PROGRAM BUTTON
once.
Note : While PROGRAM LED INDICATOR is lighted up and flashing, never press the CD STOP
BUTTON, otherwise all programmed memory will be cancelled automatically.
5.
To cancel the PROGRAMMED play mode, simply open the CD DOOR or press the CD STOP
BUTTON once.
STEREO HEADPHONE JACK
For private listening, insert the plug of a STEREO Headphone into the STEREO HEADPHONE JACK
and adjust the VOLUME CONTROL KNOB accordingly. During the use of a headphone, the
Speakers are automatically disconnected.
RECORDING FROM CD PLAYER
1.
Slide the FUNCTION SWITCH to “CD” position.
2.
Put a CD into the CD compartment with the label side upward.
3.
Insert a cassette into the CASSETTE COMPARTMENT and press PAUSE BUTTON of the cassette
deck.
4.
Press RECORD BUTTON and PLAY BUTTON simultaneously for recording stand-by. With the
built-in ALC, the best recording quality is adjusted automatically.
