English - 8
BATTERY REPLACEMENT
When batteries become weak, the operating distance of the Remote
Controller is greatly reduced and you will need to replace batteries.
USING THE REMOTE CONTROLLER CORRECTLY
•
Point the Remote Controller at the REMOTE SENSOR locates on the main unit.
•
The function of the button is the same as the corresponding control on the main
unit.
•
When there is a strong ambient light source, the performance of the infrared
REMOTE SENSOR may be degraded causing unreliable operation.
•
The recommended effective distance for remote operation is about 5 meters.
40.
Power Button
a)
While the main unit is in operation, press the
Power Button (40) once, the unit will go to
Standby Mode and Power/Standby LED
Indicator (15) will turn from green to red color.
b)
Press the Power Button (40) again and it will
resume to normal play function.
NOTE :
When the Power/Standby LED Indicator (15) is in
red color, the unit is only in Standby Mode. Press
the Power button (1) locates on the main unit to
turn off the unit completely.
41.
Play/Pause Button
Press to start play or pause temporarily in CD/MP3 Mode.
42.
CD/MP “+10” Button
Press to advance the track number by ten numbers each time.
43.
Stop Button
Press to stop CD play.
44.
CD/MP3 MODE Button
Press to play Repeat, Intro and Random function.
45.
Mute Button
Press to silence the sound output.
46.
+ 47. Skip/Search “-” / “+”
Skip or Search backward / forward for the desired track or passage in CD
mode.
48.+ 49. Volume “-” / “+”
Press to adjust the volume.
50.
Battery Door
Slide open the battery door, then insert two “AA” size or UM-3 batteries
according to the polarity diagram inside the battery compartment.
