English - 4
4.
Press the RECORD button. The PLAY button is engaged simultaneously to
start recording. With the built-in Automatic Level Control (ALC), the best
recording quality is automatically adjusted. Changing the volume level will
not affect the recording. Press the PAUSE button to release the pause
function and start recording.
5.
To stop recording temporarily, press the PAUSE button. To continue the
recording, press the PAUSE button once again.
6.
Press the STOP/EJECT button to stop recording.
7.
When the tape runs to its end, the cassette operation will be stopped
automatically.
CD/MP3 OPERATION
z
This unit can play CD-R, CD-RW and MP3 disc.
z
For CD disc playing, it has 35 seconds ESP anti-shock.
For MP3 disc playing, it has 95 seconds ESP anti-shock.
z
Should skipping of tracks occur during CD/MP3 playing, try turning the
volume down.
z
While CD/MP3 is playing, do not open the CD Door.
Normal Disc Playback.
1.
Open the CD Door by lifting the front of the CD Door. Put a CD/MP3 disc
into the CD COMPARTMENT and close the door. Set the FUNCTION switch
to “MP3/CD” position. Ensure the label side of the disc is facing upwards.
2.
When the CD Door is closed with a disc inside, LED DISPLAY will show “rE”
for a few seconds. Afterwards, it’ll show the total number of tracks on the
disc, then starts playing the first track “001” automatically.
NOTE :
z
If MP3 disc is played, MP3 LED INDICATOR will light up automatically.
z
If the CD DOOR is not closed, LED DISPLAY will show “
”.
z
If there’s no disc inside the CD COMPARTMENT, LED DISPLAY will
show “
”.
z
After playing all the tracks inside the disc, LED DISPLAY will show the
total number of tracks on the disc.
Play/Pause Mode
1.
When the CD/MP3 PLAY/PAUSE button is pressed during “STOP” mode,
the first track will be played. The LED DISPLAY will show the specific track
being played.
2.
To pause a CD/MP3 while it is playing, press the CD/MP3 PLAY/PAUSE
button once. The CD/MP3 LED DISPLAY will flash continuously.
