Standard Demand
Caution
Keep the machine away from
containers holding liquid.If the
liquid enters into the machine,
it may be damaged.
Do not expose the machine to
dust, or damp. Do not place it
near a lamp.
Warning
Warning
Caution
When using the machine, if smoke
appears, or if there is a peculiar smell ,
please turn off the power, pull out
the socket, and ask a professional to
repair it.
Caution
Put the machine in a well-ventilated
place, in order to reduce heat.
Pull out the plug before cleaning the
surface of the machine. It can be
cleaned with a damp cloth and soap.
Warning
Warning
Caution
When there are thunderstorms,
please turnoff the machine to avoid
an accident.
If the machine will not be used
for a long time, please unplug
the power.
2. Remote control maintenance
A. Keep the surface of the remote control and keys clean, because accumulated dust can alter the
function of the keys.
B. Do not place the remote control in a damp or rainy place.
C. The batteries of the remote control need to be replaced under the following conditions.
1 Continuous use for more than three months.
2 The distance capacity of the remote control appears to be shortened.
3 The power amplifier responds slowly or has no response when pressed.
Safety Precautions
Batteries should be inserted with the correct polarity
Incorrect cleaning
Correct cleaning
Note:
1 Please use a special solution to clean the discs. Do not use any volatile solutions for cleaning, ie, petrol, alcohol, etc.
2 Do not expose discs to high temperatures, direct sunlight or damp as it may cause damage to discs.
3 Protect the discs from fingerprints. Do not use a product which may damage discs.
4 When discs are not in use, always store them in their cases..
3.Disc maintenance & cleaning
After a certain time, the disc will be covered with dust and may become damaged . It is very important to keep
discs clean, so please use a cleaning cloth to clean the discs before playing.
1. Remote Control functions and operation.
Open the back cover in the back, put two batteries in (check that they are inserted with the correct polarity)
then put the cover on. Aim at the front end of the reception window of the power amplifier, after that, you can
operate the system easily with the remote control.
The lighting flash with an arrowhead symbol, within the
equilateral triangle, is intended to alert the user to the
presence of un-insulated
angerous voltage within the
product's enclosure that may be of sufficient magnitude
to cause an electric shock
“d
”
The exclamation mark within the equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this
user manual.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE.
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN OR WHEN SYSTEM IS NOT
PROPERLY CLOSED.
AVOID EXPOSURE TO BEAM
This product contains a
low power laser device.
CLASS 1 LASER PRODUCT
In order to avoid accidents, do
not open the cover, and refer to
a professional when the system
needs servicing.
Safety affairs/remote controller/discs
2
