Denver DTX-1410, Руководство пользователя

Страница: 6 / 13

-4-
OPERATION INSTRUCTIONS
PRESET
CHANNEL 00
SKIP OFF
BAND V-L
ASM.SIF 6.5M
FINE
SEARCH
ASM
1. CHANNEL
In this item, you can store the channel number which are watching, and change
the channel number by VOL.+/- Buttons (or number keys).
2. SKIP
You can set "ON" by VOL.+/- Buttons if you want to cancel the channel number
which you are watching.
3. BAND
You can select V-L, V-H or UHF.
4. ASM.SIF
You can select 6.0M, 4.5M, 6.5M or 5.5M.
5. FINE
To tune in weak station this item must be used.
6. SEARCH
Press VOL.+/- Buttons to start searching. The VOL- button searches for lower-
numbered channels; the VOL+ button for higher-numbered channels. When a
TV station signal is received ,the searching will stop.
7. ASM
Press VOL.+/- Buttons, then the TV set will automatically search from V-L band
to U band.
2.After enters each menu, you can select the item which you will adjust by PROG.+/- buttons, and adjust
this item by VOL. +/- buttons.
*The item which you select will change blue.
Preset menu
PICTURE
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
You can select BRIGHTNESS, CONTRAST, COLOR, SHARPNESS, and TINT
item by PROG.+/- Buttons , and adjust the item which you select by
VOL.+/- Buttons.
*TINT is displayed only for NTSC and is not available for PAL or SECAM.
Picture menu
35
Preset Menu Picture Menu System Menu Exit Menu
MENU BUTTON
1.Press this button to select menu. PRESET, PICTURE, SYSTEM ,and TIME menu can be selected
cyclically.
Time Menu
Turn the TV set on, then power indicator will light up. Press the program up or down button on the TV
set,or press the on/off button on the remote control.The picture will appear after a few seconds . (If tuned
on) The program number is displayed on the top right-hand corner of the screen.