Denver DTX-1410, Руководство пользователя

Страница: 11 / 13

BATTERY INSTALLATION (REMOTE CONTROL UNIT)
-9-
THE CAUSES OF INTERFERENCE
Those incorporated in your TV receiver are the
most up-to-date devices to eliminate interference.
Local radiation however, can create disturbances
which visibly affect picture. Proper installation
and , a good aerial are the best safe-guards
against these disturbances.
RF INTERFERENCE
Moving ripples across the screen are caused by
nearby transmitting or receiving-short-wave radio
equipment.
DIATHERMY
Herringbone pattern and partial picture loss can
result from the operation of diathermy equipment
from a nearby doctor's surgery or hospital.
SNOW
Weak TV signals from distant stations result in
unsteady picture and have the effect of falling
snow. An antenna adjustment or antenna
amplifier may be needed.
GHOST
Multiple image caused by TV signals which are
reflected back from surrounding buildings, hills,
aircraft, etc. is minimized by correct aerial
positioning.
CAR IGNITION
Nearby cars and electrical motors can cause small
streaks across the picture or make the picture roll.
1. Remove the battery cover.
2. Insert two batteries of
type and make sure that polarity (+/-)_match the marks
inside the unit.
3. Replace the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
Operation becomes unsteady or erratic. Sometimes the TV set does not function with Remote
Control Unit.
the 2 UM3-AA 1.5V
Remark:
1) Alkaline Batterie Recommended
2) Remove batteries when they are exhausted or if the remote control is not to be used for a long time.