background image

SPECIFICATIONS

Frequency range  : 87.5 – 108 MHz

Battery backup  

: 3V (“AAA” batteries x 2) not included

Power Adaptor 

: Input AC 100-240V 50- 60 Hz

 

 

 

  Output DC 5V 1500mA

RESETTING

If the system does not respond or exhibits erratic or intermittent 

operation, you may have experienced an electrostatic discharge 

(ESD) or a power surge that triggered the internal microcontroller 

to shut down automatically. If this occurs, simply disconnect the ac 

power cord and remove the system backup battery, wait for at least 

3 minutes and then setup the unit again as if it is a brand new unit.

WARNING

1.  No naked flame sources, such as lighted candles, should be 

 

placed on the apparatus. 

2.  Do not place the product in closed bookcases or racks without 

 

proper ventilation.

3.  The mains plug is used as the disconnect device, the disconnect 

 

device shall remain readily operable. 

4.  The ventilation should not be impeded by covering the 

 

ventilation openings with items, such as newspapers, table-

 

cloths, curtains, etc.

5.  It shall not be exposed to dripping or splashing and that no 

 

objects filled with liquids, such as vases, shall be placed on the 

 

apparatus. 

6.  Do not connect FM antenna to outside antenna. 

7.  The unit should not be exposed to direct sunlight, very high or 

 

low temperature, moisture, vibrations or placed in dusty 

 

environment.

8.  Do not use abrasive, benzene, thinner or other solvents to 

 

clean the surface of the unit. To clean, wipe it will mild non-

 

abrasive detergent solution and clean soft cloth. 

9.  Never attempt to insert wires, pins or other such objects into the 

 

vents or opening of the unit. 

10. Batteries shall not be exposed to excessive heat such as 

 

sunshine, fire or the like.

11.  Attention should be drawn to the environmental aspects of 

 

battery disposal.

ENG-7

Содержание CRB-619










Отзывы: