DENTSPLY Multimat Easy, Инструкция по эксплуатации

Страница: 50 / 154

50
Multimat
Easy
5 Controls
‹
Menu explanations
The first message of the start-up sequence after the unit is
turned on.
After turning on, the unit performs a self-test to check all
systems and input/output connectors.
The values discussed in
“Firing parameters”
are shown in
the main menu , which is always displayed when the unit
is operating.
Here you can invoke additional submenus for system
configuration (see
“Moving through the menus/Menu
overview”
)
Here you can enter a calibration offset determined by a
calibration using a silver wire test (see
“Calibration” ).
Here you can delete programs you have saved.
Here you can load programs from internal memory or from
a USB memory stick.
Here you can start a software update, provided a USB
memory stick with the new software version has been
inserted.
Here you can start a data backup.
Here you can change the language in which the menus
are displayed.
Here you can pre-set the base temperature (default:
400 °C); see the diagram in
“Firing parameters” .
Here you can determine whether the muffle will heat in
standby mode (see
“Entering standby mode” ).
Degudent KBO
V1.00 ...booting...
Selftest
Main menu
(last program)
Configuration
Calibration
Delete program
Load fixed programs
Update
Data backup
Language
[German, English]
Basic temperature
[°C/°F]
Standby temperature
[°C/°F]