DENTSPLY CALAMUS PACK, Инструкция по применению

Страница: 5 / 28

3
Specifications
• Console Dimensions: . . . . . . .4.6" x 7.4" x 4.4" cm
(11.7cm x 18.8cm x 11.2cm)
• Weight: . . . . . . . . . . . . . . . . .2.85 lbs (1.30 kg)
• Power Source: . . . . . . . . . . . .115V/60Hz, 230V/50Hz
• Current Rating: . . . . . . . . . . .115V/0.10A, 230V/0.05A
• Fuses: 115V: . . . . . . . . . . . . .0.10A/250V Slo-Blo ® fuse
230V: . . . . . . . . . . . . .0.05A/250V Slo-Blo
®
fuse
• Note: The appliance inlet is the mains disconnect means.
• Battery Type: NiMH 9.6V, nominal 4500 mAh
• Plugger: . . . . . . . . . . . . . . . .Stainless Steel
• Thermal Response Tip: . . . . .Aluminum/Stainless Steel
• Environmental Conditions:
ª Operating Temperature: 50° to 82.4°F (10° to 28°C)
ª
Storage Temperature: -4° to 140°F (-20 to 60°C)
ª Relative Humidity: 5 to 95 % non-condensing
ª Altitude: 0 to 10,000 feet (0 to 3,048 meters)
• Duty Cycle: . . . . . . . . . . . . . .25%
• Temperature range: . . . . . . .100 - 400°C
• Tone level range: . . . . . . . . .0 - 100%
Handpiece Maximum continuous heating time:
• 10 seconds for temperatures above 200°C.
• 15 seconds for temperatures at or below 200°C.
• One minute in thermal response mode.
Caution:
This device has been tested and found to comply with the emissions requirements of IEC
60601-1-2:2001-09. These requirements provide reasonable protection against harmful
electromagnetic interference in a typical medical installation. However, high levels of radio-
frequency emissions from electrical devices, such as cellular phones, may disrupt the
performance of this device. To mitigate disruptive electromagnetic interference, position this
device away from radio frequency transmitters and other sources of electromagnetic energy.
MEDICAL ELECTRICAL EQUIPMENT
WITH RESPECT TO ELECTRIC
SHOCK, FIRE AND MECHANICAL
HAZARDS ONLY IN ACCORDANCE
WITH UL 60601-1 (First Edition) and
CAN/CSA C22.2 No 601.1-M90.
41EJ