Recommended Separation Distances:
Recommended separation distance between portable and mobile RF
communications equipment and the
LEDEX
TM
WL-090+
The LEDEX
TM
WL-090+ is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the
LEDEX
TM
WL-090+ can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF communications equipment
(transmitters) and the LEDEX
TM
WL-090+ as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
output power of
transmitter (W)
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d = 1.2 √P
80 MHz to 800 MHz
d = 1.2 √P
800 kHz to 2.5 GHz
d = 1.2 √P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be determined using the
equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
Note1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies
Note2: These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
22
EN
Содержание Ledex WL-090+
Страница 1: ...Instructions for use SV TELN POLYMERA N LAMPA A DETEKTOR PLAKU A KAZU N vod k pou it...
Страница 26: ......
Страница 52: ......
Страница 54: ...2112V1...
