Professional LED Light System for All of Surgery Application
12
and equipment’s manager.
Ÿ
It must read and learn this user’s manual is compulsory before installation, using,
cleaning, fixing or operation of this product or its accessories. Pay particular
attention and be familiar with warning symbols about safety.
Ÿ
If do not follow safety direction of this manual, you can get injured or accident when
you operate this product. After read carefully and understand this manual, use this
product.
Ÿ
This manual is in keep a place where you can find easily.
4.5 Warranty regulation
Ÿ
DENTIS warrants all products against defects in materials or workmanship for one
year from time of delivery.
Ÿ
DENTIS’s sole obligation under the warranty is to provide parts for the repair, or at its
option, to provide the replacement product (excluding labor).
Ÿ
The buyer shall have no other remedy. All special, incidental, and coincidental
damages are excluded.
Ÿ
Written notice of breach must be given to DENTIS within the warranty period.
Ÿ
The warranty does not cover damage resulting from improper installation or
maintenance, accident or misuse.
Ÿ
The warranty does not cover damage resulting from the use of cleaning, disinfecting
or sterilization chemicals and processes.
Ÿ
The Failure to follow instructions provided in the DENTIS Instructions for Use
(operation and maintenance instructions) may void the warranty.
Ÿ
LED PCB is covered under 50,000 hours warranty.
4.6 Electromagnetic Compatibility
Ÿ
Guidance and manufacturer’s declaration - Electromagnetic emissions
The L200 is intended for use in the electromagnetic environment specified below. The customer or
the user of the L200 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Complies
(Group 1,
Class A)
The L200 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
