- 4 -
Appliance description
1
Brush head
2
Brush holder
3
Charging station
4
Wall holder
5
Charge indicator
6
Pulse LED (yellow)
7
Soft LED (green)
8
"Clean" LED (orange)
9
On/Off switch
0
Travelling case
Set-up / Wall holder
The charging station
3
may only be operated free-standing
in dry rooms.
In moist rooms, especially in the vicinity of water (bath), the
charging station
3
must be fi rmly fi xed to the wall, to protect
it from falling into water.
•
Pull the wall holder
4
downwards from underneath the
charging station
3
.
•
Using the screw openings of the wall holder
4
, mark the
spacing for the boreholes on the wall. Check to ensure that
there is a mains power socket in close vicinity.
• Before boring the holes, check to ensure that there are no
electrical or water conduits behind the markings.
• Using a 5 mm drill, drill the marked holes and insert the
supplied wall plugs.
• Secure the wall holder
4
using the screws.
• When you have attached the wall holder
4
, guide the
power cable through the right or left recess in the wall
holder
4
(see magnifi cation on the fold-out side).
Using the guide rails, slide the charging station
3
onto the
wall holder
4
.
• Ensure that the power cable is not trapped and that it lies
properly in the recesses.
IB_71085_DAZ24A1_LB6.indb Abs1:4
IB_71085_DAZ24A1_LB6.indb Abs1:4
18.11.2011 10:03:09 Uhr
18.11.2011 10:03:09 Uhr