DentalEZ RAM VAC COSP22S, Руководство пользователя

Страница: 8 / 41

5
www.DentalEZ.com 866-DTE-INFO
5
PN: 1045DOC_E
Section I Introduction
Safety Precautions
To ensure that the safety potential of this equipment is achieved, make sure equipment is installed
according to written instructions and that the provided Installation Checklist is completed. If
compressor was purchased from an authorized dealer, the dealer is responsible for providing the
completed checklist.
WARNING
• Do not modify this equipment without
permission from RAMVAC. Unauthorized
modi fi cation will void the warranty and
could result in serious injury. If this
equipment is modi fi ed, appropriate
inspection and testing must be conducted
to ensure continued safe use of
equipment.
• Electrical shock could occur as a result of
improper grounding. This product must
be grounded according to NEC regulations
and local codes.
• Property damage and/or personal injury
may result if directions are not followed or
OEM parts are not used.
• Always turn o ff compressor and remove
power from compressor when servicing.
(Turn o ff power at disconnect or service
breaker.)
• Danger of fi re or explosion when using
fl ammable substances.
• Never leave children unattended when
compressor is in use.
• The compressor has several guards
designed to protect against accidental
contact with dangerous components.
Do not remove these guards until power
has been disconnected/turned o ff from
the equipment. If service is required with
the guard removed and the power on, it
should only be performed by a quali fi ed
service technician. Always replace any
guards that have been removed for
service or that may have been damaged.
• During installation, always ensure all
electrical, plumbing or other utilities are
properly located to avoid possible tripping
or falling hazards. Always follow all local,
state and national building codes, as
well as any applicable workplace safety
regulations.
• Use of a plug for electrical service is not
recommended. Incorrect connections will
cause a drop in line voltage and/or loss of
power. Overheating could result.
• Connect only equipment suitable for listed
maximum pressure of the compressor.
CAUTION