DentalEZ RAM VAC COSP22S, Руководство пользователя

Страница: 17 / 41

www.DentalEZ.com 866-DTE-INFO
14
Osprey
TM
Compressor
PN: 1045DOC_E
Section III Installation
Low Voltage Wiring Kit
WARNING
• Prior to starting this assembly, read,
understand and follow the safety
information and the assembly instructions
in this user manual.
• Always disconnect the compressor
from the electrical power source prior to
conducting any maintenance or service
of the equipment. The compressor could
start unexpectedly resulting in possible
injury to the service technician.
• This procedure may not comply with all
safety requirements of federal, state or
local agencies or safety requirements of
the installer’s employer. If a con fl ict does
exist, follow the requirements set forth by
the other organizations.
Assembly
1. The compressor can be ordered with two
di ff erent control schemes (basic or smart) which
in fl uence the method for wiring a low voltage
switch. If the electrical box has a plastic cover
with the RAMVAC logo on it, it is a basic control
version; if the compressor has a C2 control, it is
considered a smart control. The instructions in
this manual contain information for wiring both
versions, so care is required to make sure the
proper instructions are used (Figure 9) .
2. This kit contains wire nuts required to make the
connections to the basic control and the FGH
connector required to attach the wires to the
smart control.
3. See the Low Voltage Remote Switching section
of this user manual for the recommended wiring
methods for di ff erent types of switches.
4. The basic control will require that a strain relief
(not included) be added where the low voltage
wires from the facility enter the pressure switch.
All connections should be housed inside the
pressure switch; do not leave wire connections
outside the pressure switch.
Parts Included
• FGH Connector for Smart Controls
• Wire Nuts for Basic Controls
FGH
Connector
for Smart
Controls
Wire Nuts
for Basic
Controls
Figure 8. Low voltage wiring kit parts
Basic
Control
Smart
Control
Figure 9. Basic and smart control electric panels