Denso SE1-QB, Руководство пользователя

Страница: 25 / 98

12
3.3 Breaking Bluetooth
®
Wireless Links
Holding down the magic key for at least five seconds or scanning the “Break Bluetooth
®
wireless link” QR Code symbol
forcibly breaks the scanner’s Bluetooth
®
wireless link. (The QR Code symbol is given in Section 11.2 and its procedure in
Section 11.1.)
Note
: Breaking the Bluetooth
®
wireless link does not disable the Bluetooth
®
interface. To disable it, scan the “End
operation” QR Code symbol given in Section 11.2 and its procedure in Section 11.1.
3.4 Re-establishing Bluetooth
®
Wireless Links
When the scanner’s Bluetooth
®
wireless link has been broken by any of the following operations, pressing the trigger switch
or the magic key re-establishes the Bluetooth
®
wireless link.
The scanner as a slave waits for a connection request from the master; the scanner as a master connects to a target slave.
• When “Scan w/ Bluetooth
®
link broken” is set, scan the “Scan w/ Bluetooth
®
link broken” QR Code symbol given in
Section 11.2 and its procedure in Section 11.1, scan the Cancel “Scan w/ Bluetooth
®
link broken” QR Code symbol to
set cancel and then press the trigger switch.
• When the scanner was turned off by an auto power-off, press the magic key.
• When the Bluetooth
®
communications parameters are modified in the configuration software (Scan Tune App), press the
trigger switch.
• When the “Reconnect request” dialog box is displayed by the configuration software (Scan Tune App), press the trigger
switch.
• When the battery is replaced, press the magic key.
3.5 Indication of Bluetooth
®
Wireless Link Status
The scanner’s indicator LED and beeper together indicate the status of the scanner’s Bluetooth
®
wireless link.
When the trigger switch is held down:
Indicator LED Beeper Scanner Status
Red, flashing Scanning was performed when there was a Bluetooth
®
wireless
link on enabling the link.
Red, flashing twice
repeatedly
The scanner has scanned the “End operation” QR Code symbol.
Not turn on
Silent
Scanner power is off
When the trigger switch is pressed and released:
Indicator LED Beeper Scanner Status
Blue, flashing rapidly The scanner, as a master, is searching for a connection target.
Blue, flashing slowly
Silent
The scanner, as a slave, is waiting for the master to connect.