Denso SE1-BB, Руководство пользователя, Страница: 41 / 86

28
The indicator LED can be disabled with the Bar-coded parameter menu or configuration software (Scan Tune App). In any of
the following cases, however, the indicator LED turns on regardless of the current LED setting:
- when the scanner is being customized with the Bar-coded parameter menu,
- when the scanner receives an LED-ON command (LB, LG or LR) from the host computer (refer to Appendix 2),
- when the configuration software (Scan Tune App) starts up or any setting is newly reflected,
- when the parameter values are saved by a PW command (refer to Appendix 2),
- when the scanner failed to save parameter values specified with the configuration software (Scan Tune App), Bar-coded
parameter menu, or control commands,
- when the Bluetooth
®
wireless link status is displayed,
- when the battery voltage has dropped,
- when the battery voltage status is displayed, or
- when the scanner failed to save the settings.
8.3 Illumination LEDs
When the scanner is ready to scan, the illumination LEDs are turned on.