Denso SE1-BB, Руководство пользователя, Страница: 22 / 86

9
Windows (SPP Profile)
(1) The Bluetooth icon is displayed in the notification area at the bottom right of the screen. Right click the icon and then
click [Add a Device].
(2) From the list of devices, select “SE1”.
Drive installation starts.
(3) When the “PIN” code confirmation is displayed, enter “1234”.
(4) Select “Skip obtaining driver software from Windows Update”.
After a while, the standard serial interface via the Bluetooth wireless link is readied.
(5) From the Windows toolbar, select “Open settings” under “Bluetooth Devices”.
(6) Click on the “COM Ports” tab, and check the COM port No. assigned to SE1.
(7) In the operation app, open the assigned COM port. This completes pairing and the wireless link is established. After a
while, the scanner sounds the beep twice.
(4) The next time connecting to the device, simply press the trigger switch. (Only when connecting with the same device)
When using the configuration software (Scan Tune App)*
(1) Select the SPP profile for the scanner and connect it to the BA series communication adapter or the host computer
equipped with Bluetooth
®
.
(2) In the configuration software (Scan Tune App)*, configure the following items to match the connected device.
· Connected device (Android, PC/iPhone, iPad)
· Profile (SPP/HID)
· Mode (master/slave)
· Local device ID (other device/peripheral device keyboard)
(3) Select the scanner from the connected device list and connect it to the device.
The scanner beeps twice if successfully connected.
(4) The next time connecting to the device, repeat the step (3).
* The configuration software (Scan Tune App) is available as free downloads from our website at
http://www.qbdirect.net
.