Denso QK31-R Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 109

background image

6

3.2.1 Setting up the USB-COM interface

Using the USB-COM interface requires installing the Active USB-COM port driver provided by DENSO WAVE to
the host computer. The driver does not come with the scanner in a CD-ROM. It can be downloaded for free from our
website at:

http://www.qbdirect.net

The file downloaded contains the setup file for the driver and the installation guide. Install the Active USB-COM port
driver in accordance with this installation guide. For the latest information, refer to the manual that comes with the
driver.

Notes for installing and using the Active USB-COM port driver



The driver should be installed with administrative permission (Administrator Login).



The driver does not contain a Microsoft digital signature. Therefore, do not block installation of drivers containing

no signature with the driver's signature option or local policy's security option.



The driver allows hot plugging or unplugging of a USB device even during communication (when the COM port is

being opened); however, the communications data when the USB device is disconnected will be lost.



The driver always serves as a virtual serial port even if a USB device is unplugged, so the driver always occupies a

COM port number.



The driver cannot coexist with conventional Denso USB-COM device drivers in a host computer. In the installation

procedure, the Active USB-COM port driver requires uninstalling the conventional ones.



Installing the driver on a single host computer more than one time enables more than one USB device to be used.

However, the uninstaller of the Active USB-COM port driver uninstalls previously installed drivers, not
individually but all at once.

Installation procedure

For the installation procedure, refer to the Active USB-COM Port Driver Installation Guide attached to the
downloaded driver.
The driver installation procedure consists of two processes: installation of the serial port driver to be performed before
connection of the USB device (scanner) and installation of the USB driver to be performed following connection of
the USB device.

«
...
15
16
17
18
19
...
»

Содержание QK31-R














































































































Отзывы:

Нет отзывов

Похожие инструкции для QK31-R

Бренд: Wasp Страницы: 12

Бренд: Wasp Страницы: 44

Бренд: Velleman Страницы: 3

DigiScan TV 2in1

Бренд: DNT Страницы: 86

Бренд: Prowill Страницы: 92

Бренд: HOKUYO AUTOMATIC Страницы: 155

Бренд: Symbol Страницы: 328

ValueScan III IDBB-4244MRB

Бренд: IDTECH Страницы: 63

Бренд: Leidos Страницы: 119

Бренд: Opticon Страницы: 23

Бренд: Zebex Страницы: 8

Бренд: Zebex Страницы: 36

DIGIVAL LFR-024

Бренд: Abbott Страницы: 81

Бренд: zenpert Страницы: 33

Бренд: Youjie Страницы: 142

SeeLevel 710-JS

Бренд: Garnet Страницы: 12

Бренд: Bandit Страницы: 43

LS2200-1 Series

Бренд: Datalogic Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды