Denso QK11-U, Руководство пользователя

Страница: 25 / 48

13
Setting initial conditions
•
Although the communication conditions and specifications of codes to be read have
been set at the factory, they can be modified using the QR-coded parameter menu.
Notes:
(1) Check “4. Parameters and Defaults” and “5. QR-coded parameter menu” for
details on QR-coded parameter menu.
(2) The contents set using QR-coded parameter menu will be stored in memory of
scanner even if power is turned off.
Cautions for connections
Cautions
•
Make some allowance for scanner cable.
•
Do not leave the scanner cable on the floor.
•
Do not step on the cable or let it get caught on anything so that it gets scratched.
•
Be sure to hold the connector securely when plugging in and unplugging the
USB cable.
Cautions for installation
Caution Remarks
Do not install the scanner in a place
that is exposed to direct sunlight or
near a heater.
Do not install it where the temperature
and humidity are high, such as in
greenhouse, or where the
temperature is extremely low, such as
in a refrigerator. The circuits and optical components in
scanner can be damaged in an
environment where the temperature is
extremely high or low, or the humidity
is very high.
Do not install where water may be
splashed. Water entering the scanner could
cause fault.
It is recommended that you firmly
secure the scanner or cable on a table
where the scanner is set up, to
prevent it from falling off the table.
Bundle the surplus cable so that the
scanner does not fall when the cable
gets caught on something. If the scanner falls, its appearance
may be damaged or it may
malfunction.
Do not install near a device that
generates high frequencies. High frequencies could cause the
scanner to malfunction.
Set up the scanner so that no sunlight
or strong light from some lighting
device, etc. enters the scanning
window. If the sunlight or strong light from
some lighting device, etc. enters the
scanning window, reading may be
impossible.