Denso HC36 II DTU-K, Руководство по эксплуатации

Страница: 14 / 52

11
3-4
． ． ． ．
Windows XP
(1) Switch the computer on to run Windows XP. Log on as an
Administrator.
(2) Connect the scanner interface cable to the computer or USB
hub.
(3) The Found New Hardware hint pops up on the Windows task
tray.
Wait for a moment. Windows will automatically configure the
scanner. Upon completion of installation, the finish screen
appears instead of the screen above. Click Finish to return to
Windows.
(4) To check whether the USB device is working normally, open
Windows’ Device Manager.
If USB Human Interface Device is added to the sub-tree of
Human Interface Devices as shown below, the scanner is
connected normally. If the device is not added or it is marked
with or , remove this driver with the uninstaller, reboot your
computer, and perform the above connection process again.