Denso HC36 II DTU-K, Руководство по эксплуатации

Страница: 12 / 52

9
3-2
． ． ． ．
Windows Me
(1) Switch the computer on to run Windows Me.
(2) Connect the scanner interface cable to the computer or USB
hub.
(3) New Hardware Found wizard starts.
Wait for a moment. Windows will automatically configure the
scanner. Upon completion of installation, the finish screen
appears instead of the screen above. Click Finish to return to
Windows.
(4) To check whether the USB device is working normally, open the
Windows’ Device Manager.
If USB Human Interface Device is added to the sub-tree of
Human Interface Devices as shown below, the scanner is
connected normally.
If the device is not listed or it is marked with , the device is not
working normally. Perform the connection process above again.
If marked with , the device is disabled, so enable it in the
Property dialog. If marked with a , the device is working
normally.
The scanner is designed to work with the default device driver of
Windows Me but the device name is not officially registered to
the driver, so the device is marked with an . There is no
problem with driver operation.