13
4.2.3
Point the code reading window towards the barcode to scan and
press a trigger key on the side of the scanner.
Light for scanning is irradiated and the printed barcode is
scanned.
When the data is successfully scanned and displayed, or the time
has elapsed, the light for scanning disappears.
4.3
Turning OFF the Power
To power off the BHT, press and hold the power button
, and tap the pop up
★
Power off
★
menu.
Make sure that all user data and tasks are saved before tapping the
★
Power off
★
menu.
4.4
Battery Power Level Indicator
You can check the battery charge on the battery icon, on the top left corner of the screen. The battery
indicator just shows the estimated battery remaining, so charge the device a little at a time, whenever
you have a chance.
Refer to the Safety Precautions for proper handling and usage of the battery.
Battery icon Status
100%
100%
76%
Slightly reduced
15%
Dropping below 15%
Charging
4.5
Using the BHT after Long Non-Use
Data stored in the BHT may be lost or damaged and the calendar clock may stop if the BHT is left
unused for a long period.
Keep a backup copy of important or critical information beforehand.
Reset the calendar clock if it is stopped.
The battery can also be served as a backup power source to fully charge the sub-battery. To
successfully achieve this, keep the battery installed at least for 10 minutes.
Please refer to the User’s Manual
for more information on trouble shooting.
Содержание BHT-M70 Series
Страница 21: ...21 2 1 BHT M70 上側面 下側面 揚聲器 接收器 狀態指示燈 麥克風 USB連接器 介面連接器 手帶 後相機 條碼讀取窗口 電池蓋鎖 M1鍵 M2鍵 左觸發鍵 電源鍵 M3鍵 M4鍵 右觸發鍵 ...
Страница 22: ...22 3 1 手帶安裝 如圖所示 將手帶分別固定在兩個位置 連接手帶 如圖所示安裝觸控筆 選擇手帶的右側或左側 也可以將手寫筆存放在手帶中 ...
Страница 23: ...23 3 2 插入和取出主電池 3 2 1 插入 按箭頭方向插入電池 3 2 2 按箭頭方向壓下電池 3 2 3 移除 沿箭頭方向壓下電池蓋鎖 3 2 4 握住電池鎖片 拉出電池 電池電極 ...
