Denso BHT-904B, Руководство пользователя

Страница: 85 / 198

71
Barcode Handy Terminal
[3] Read barcode
Select [3: READ CODE] at the OPEN BAR SETTING menu and then
reading to ON/OFF. The highlighted settings
o change the setting, use the cursor keys ([ ▲ ] [ ▼ ]) or numeric keys ([1]
] [7] [8]) to select the desired item and then use the cursor
ke
“1: E C”
En d
: ITF”:
es or disables reading of the interleaved 2of5 (ITF).
En r d
“4: CODE39”:
Enables or disables reading of the Code 39
“7: RSS”:
Enables or disables reading of the standard 2of5 (STF).
When the
ENT
key is pressed, it is possible to carry out further setting of the selected barcode. For details,
refer to the information below.
Press the Backspace/clear key to update the setting and return to the SET BARCODE menu.

Point

“1: EAN/UPC” and “7: RSS” include multiple barcode types. It is possible, via DETAIL (detail
setting), to enable or disable barcode reading for each type. To enable reading, set both this
and the detail settings to ON (enable).
press the Enter key. When the SET BARCODE screen appears, it is
possible to set the barcode
are the current settings.
T
[2] [3] [4] [5] [6
ys ([ ◄ ] [ ► ]) to select the desired setting.
AN/UP :
ables or isables reading of the universal product codes.
“2
Enabl
“3: CODABAR”:
ables o isables reading of the Codabar (NW-7).
“5: CODE93”:
Enables or disables reading of the Code 93.
“6: CODE128”:
Enables or disables reading of the Code 128.
Enables or disables reading of the RSS (GS1 Databar).
“8: STF”: