Denso BHT-904B, Руководство пользователя

Страница: 71 / 198

57
Barcode Handy Terminal
4.5.4 Uploading Files (UPLOAD Menu)
Upload files stored in the BHT user area to another device.
Refer to “5.2.2 MTP Communication”
Use the following procedure to upload files.

Note

Uploading files by MTP via a USB communication port is
also available.
- M T P -
T e r m i n a t i o n K e y :
[ B S / C ] o r [ C ]
1.
elect “3: UPLOAD” at the SYSTEM MENU and then press the
: ONE FILE
Select to uplo
: ALL FILE
Select to uplo
: HT<-->HT
Select to uplo
ress the
Bac
he current c
Communicatio
S
ENT
key.
The screen display as shown on the right.
“1
”:
ad a specific file.
S”:
ad all files, excluding font files.
COPY”:
ad a file to another BHT.
Refer to “4.5.5 Copying Files betwe
“2
“3
Communication protocol type
Interface used
Transmit speed
en 2 BHT Units” for details.
P
kspace/clear
ommunication settings display
n protocol type Ymodem
BHT-Ir
BHTp
key to return to the SYSTEM MENU.
at the bottom of the screen.
Ymodem protocol
BHT-Ir protocol
BHT protocol
T
Interface used Opt
Con Infrared interface
USB interface
Transmit speed 9600 to 460800 Transmission speed corresponding to each protocol
Refer to “4.5.6 System Environment Settings (SET SYSTEM Menu)” for details of communication
environment settings.

Point
 If BHT protocol or BHT-Ir protocol is selected for the communication protocol, BHT-BASIC 4.0*
specification files will not display at the file selection screen, and therefore cannot be
downloaded.
(*Applications with extension “.PD4”, extension libraries with extension “.FN4”, and data files
that have any of the following structures: the number of fields is 17 or more, the total of the
number of fields and each field length is 255 or more, and the number of records is 32768 or
more)