background image

WARNING

Do not

short-

circuit me!

Charge only

with the

dedicated

device.

Undedicated

• Do not carry or store the recharge-

able battery cartridge together with
metallic ball-point pens, necklaces,
coins, hairpins, etc.

Doing so could short-circuit the ter-
minal pins, causing the batteries to
rupture or the battery fluid to leak,
resulting in a fire or bodily injury.

• Avoid dropping the rechargeable battery cartridge or letting it

undergo any shock or impact.

Doing so could cause the batteries to break, generate heat, rup-
ture or burn.

• Only use the dedicated charger (CU-

7001, C-700 or C-750) for charging
the battery cartridge.

Using a different type of charger
could cause battery-rupture or leak-
age of battery fluid and result in a
fire, bodily injury, or serious damage
to property.

• Never charge the rechargeable battery cartridge where any in-

flammable gases may be emitted; doing so could cause fire.

Handling the BHT

• The BHT-7500W uses a laser light for scanning bar codes.  The

intensity of the laser light might be too low to inflict bodily in-
jury.  However, do not look into the laser beam.

The BHT-7500W complies with Laser Safety Standard, Class

 II

of 21 CFR Chapter 1, Subchapter J.

The BHT-7500W does not mount beam attenuator and laser ra-
diation emission indicator required by this standard.  Instead,
the software-controlled Magic keys (see “Components and
Functions”) function as them because the laser light is not en-
abled without the Magic keys pressed.

AVOIDEXPOSURE-LASERLIGHTISEMITTEDFROMTHISAPERTURE

LASERLIGHT-DONOTSTAREINTOBEAM

1mWMAXIMUMOUTPUT;650nmLASER

CLASSIILASERPRODUCT

THISDEVICECOMPLIESWITH21CFRCHAPTER1,SUBCHAPTERJ.

CAUTION

Содержание BHT-7500W































Отзывы: