background image

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.

Strict observance of these warning and caution indications are a MUST for
preventing accidents which could result in bodily injury and substantial prop-
erty damage.  Make sure you fully understand all definitions of these terms
and related symbols given below, before you proceed on to the text itself.

Alerts you to those conditions which could cause
serious bodily injury or death if the instructions
are not followed correctly.

WARNING

CAUTION

Alerts you to those conditions which could cause
minor bodily injury or substantial property dam-
age if the instructions are not followed correctly.

Meaning of Symbols

A triangle (

) with a picture inside alerts you to a warning of dan-

ger.  Here you see the warning for electrical shock.

A diagonal line through a circle (

) alerts you to something you

should not do; it may or may not have a picture inside.  Here you
see a screwdriver inside the circle, meaning that you should not dis-
assemble.

A black circle (

) with a picture inside alerts you to something you

MUST do.  This example shows that you MUST unplug the power
cord.

WARNING

Handling the rechargeable battery
cartridge

• Never disassemble or heat the re-

chargeable battery cartridge, nor put
it into fire or water; doing so could
cause battery-rupture or leakage of
battery fluid, resulting in a fire or
bodily injury.

Never

put me

into fire!

Содержание BHT-7500W































Отзывы: