4
1.3
Positioning and fixing parts
Camera:
◦
Mount on a stable base, which doesn't move or resonate
◦
The camera should have a free sight, with no parts in front
of the lens
◦
Do not place the camera in a position where it can be
damaged when the model hits an obstacle
◦
Secure the plastic clip of the camera with included cable tie
WiFi dongle
◦
Position it on the top part of the model
◦
Place it as far away from metal parts as possible
◦
Fasten the USB connector with included cable tie
WiRC module:
◦
Use the place of the original receiver, if possible
◦
Make sure that cables (Camera, WiFi, Power, Servos, ESC)
can run and connect to the module smoothly
◦
Fix WiRC with included double-sided adhesive tape
Before starting installation, disconnect all the
battery, servo, ESC cables and remove the original
receiver – if any.
WiRC is not waterproof. Water and humidity can
cause damage to WiRC, for which we assume no
liability.
