12
Channel name:
Name the channels to remember its function e.g. Steering,
Speed, etc.
Reverse:
Changes the direction of the servo rotation in relation to the
joystick movement.
Test settings button:
Use this button to test Min/Max/Trim settings, when you are
connected to the WiRC. While pressed, the Trim value will be
output for the channel. Once you set Min/Max, their last value will
be output. This allows the quick setup of the three parameters.
Min/Max:
Set the Min/Max value to the desired servo movement or ESC
speed. Max corresponds to the Up or Right position of a joystick
or the maximum speed, while Min corresponds to the Down or
Left position, and the maximum reverse speed.
Trimming:
Sets the center position of a servo, or the idle state of an ESC
Failsafe:
Select the link-loss failsafe action for the channel:
Disable output
:
Disable the output of the
channel, so that other failsafe
mechanisms can take over
Last good
: WiRC continues to output the last received value
