Gateway Pro
iPod, USB, Bluetooth
General Installation Guide
v.1.0
GWP-9210-1
1.
I
NTRODUCTION
The Dension Gateway Pro
lets you
connect your iPod or USB storage
(stick, hard drive or mass storage
capable mp3 player) to your original car
radio, providing music playback, menu
based control and charging.
The Gateway Pro offers Bluetooth
connectivity for music streaming (via
A2DP) and handsfree mobile call
handling via the original buttons and
screens of your vehicle.
2.
G
ETTING STARTED
At first please make sure that the
vehicle compatibility is correct.
The Dension Gateway Pro is available
in specific versions for different vehicle
types, therefore the exact operation and
installation may be different in each
case.
Before you start!
During the installation always make
sure that the ignition key is removed
from the car, the radio is switched off
and that you have the security code
of the head unit (radio) available (if
applicable).
Remove the head unit
First, carefully remove your vehicle's
existing factory fit head unit as per the
factory instructions and using the correct
tools.
In some cases, removing the head unit
will require panel removal. Contact your
vehicle's dealer or installation supplier /
installer for more information.
3.
F
ITTING THE
G
ATEWAY
H
ARNESS
Once the head unit has been removed,
disconnect the antenna cable
(1)
, then
unclip the main wiring connector from
the head unit
(2)
. This will differ in all
makes and manufacturers.
With the main radio cable removed,
connect the Dension supplied cable
between the original factory cable
harness and the head unit.
4.
I
NSTALLATION
(P
ART
1)
The below diagram depicts how the
different modules connect to the
Gateway Pro.
Connect the 18 way micro-fit to the Car
side of the Gateway Pro module.
Connect the
round iPod connector
(optional)
and connector port
(
optional)
to the module and feed them through
the dashboard to an appropriate
location.
Connector port
(optional accessory)
The Connector port allows easier
access to the USB and Aux connections
of the gateway, and provides a bypass
switch and an easy reset option. The
iPod connection and charging is
possible directly through the iPod Dock
Cable or an iPod Cradle (not included).
The connector port
Please fix the connector port in a
position where the user can access the
inputs, and leave sufficient room for
attaching USB storage devices.
