background image

5.

 

I

NSTALLATION 

(P

ART 

2) 

You can find DIP switches on the 
bottom of the Gateway Pro. You can 
activate / deactivate functions with DIP 
switches like 

Bluetooth (#5) or Media 

(#6 – only on BAP)

. Change the default 

settings only if you want to use the 
factory fitted options. 

For example:

 If 

you want to use the factory phone 
option instead of the Pro, set DIP switch 
#5 ON and change the 4 PIN molex 
(phone audio) position as it can be seen 
below 

(#2).

 

 

The rest DIP switches between 1 - 4 are 
non-functional.   

Please note:

 Factory phone option 

must be removed if available and the 
phone option of the Pro is used.  

Fitting the microphone 

The microphone will work best when it is 
kept away from all noise sources (open 
windows or speaker) and close to the 
speaker. So the best place to ensure 
perfect sound is to install at the light 
cluster or rear view mirror in the centre 
of the wind screen. There are clips that 
help you to do this. 

The optimal place for the microphone 
depends on many factors, so it is 
recommended that you try different 
installation places before finally 
mounting the microphone. 

6.

 

T

EST AND REFIT

 

Before you refit the head unit, 

test

 the 

Gateway Pro with your car audio, 
making sure all connections are 

correct

 

and that you 

have full functionality

Note: If during testing you notice any 
changes or inconsistencies in the 
way the car's electrical system 
operates, disconnect the Gateway 
product immediately and consult 
your dealer. 

When you have tested everything, refit 
your head unit. 

Do not trap the cables, 

or leave them in a position where 
they may become trapped after 
refitting the head unit. 

We supply 

cable ties to mount the Gateway Pro 
module. 

Please mount the module 

away from heat or damp surfaces.

 

Refit is the reversal of the removal 
process for your specific vehicle, as per 
your manufacturer's instructions. 

7.

 

E

NABLING

 

The Gateway Pro emulates a CD 
changer (in most cases) therefore 
generally no programming is required or 
the Pro is capable to do activation 
during the first Power ON circle 
(typically on Peugeot).  

On CAN BAP based systems (like 
RCD310, 510 or RNS510) the Pro 
emulates the factory MDI (Multimedia 
Interface) and Telephone option which 
needs to be coded since Model Year 
2011. If your vehicle has not been 
programmed before, the 

Media Player 3 

(2E)

 and 

Telephone (7E)

 options 

have 

to be coded

 in order for the Pro to work 

correctly. Please note: Programming is 
not required if your vehicle had those 
options enabled before.   

8.

 

D

ISCLAIMER

 

All photos / illustrations are for 
representation purposes only and may 
differ visually from the equipment in your 
vehicle. Information correct at time of 
going to print E. & O. E. Dension Audio 
Sytems Ltd. and it’s registered partners 
cannot be held liable for any damages 
caused by the incorrect installation of 
any Dension product. 

9.

 

F

URTHER ASSISTANCE

 

If you need further assistance in using 
your Dension product, please contact 
your local supplier or visit 

www.dension.com/en/support

 

and click 

on ‘Support’. 

Please check

 also the 

download 

section

 for the latest firmware version 

and product documentation, as these 
may provide additional features or 
easier use of the product. 

 

Отзывы: