3
1. Important Safety Instructions
1-1 General Safety Precautions
WARNING
Read following safety instructions carefully before installation.
Save these instructions of PANcharge1k battery charger and batteries. This manual contains
important safety and operating instructions.
Operate PANcharge1k in a well-ventilated and dry area. Do not exposed to rain or snow.
To reduce a risk of fire, do not cover or obstruct the ventilation enclosure.
To avoid a risk of fire and electric shocks, do not operate charger with damaged or undersized
cords.
To avoid the risk of fire and electric shocks, do not disassemble charger.
Note:
Warranty not valid once PANcharge1k is disassembled.
To reduce the risk of electric shock, follow the steps below before wiring, maintenance and
cleaning.
Turn AC power switch off.
Remove AC power cord from the charger.
First remove the black charging clip from the battery then the red one.
By covering charging clips to avoid short circuit of charging terminal while turning switch ON.
Ground the earth cord with the power cord to reduce the risk of electric shock, to protect from
external radio interference and not to radiate harmful emissions. The earth cord is connecting
with the charger’s chassis.
To avoid the risk of electric shock and fire, adjust the AC power switch in the rear of the charger
to the same voltage as the input one. Plug the proper power cord to the plug-in. NEVER input
230Vac with the 115Vac setting. It may lead to a fire, electric shock, or charger damage.
NOTE
Once PANcharge1k is opened or modified, DENRYO CO., LTD. has the right
not to provide warranty service.
1-2 Battery Precautions
Read the instructions of battery carefully before operating.
Place battery in a well-ventilated and dry area. Do not exposed to rain or snow.
NEVER smoke or allow a spark or flame in vicinity of battery.
Be extra cautious to reduce risk of dropping metal tool onto battery. Remove personal metal
items such as rings, necklaces, and watches when working with battery.
The battery may make corrosive gas during charging. Keep ventilation well.
Protect eyes and clothes when you work close to battery. Do not get too close to the battery with
your eyes.
When moving the battery, removing wiring from the earth terminal at first. Make sure all the
optional accessories have been turned OFF to reduce the possibility of sparking.
