Denon PMA-60, Руководство пользователя

Страница: 58 / 70

o
Sound is distorted or interrupted, or noise occurs
Symptom Cause / Solution Page
Sound is distorted or
interrupted, or noise
occurs.
0
Adjust to an appropriate volume level on this unit and the connected devices. 29
0
Place the device connected via Bluetooth closer to this unit.
－
0
Place this unit away from microwaves, wireless LAN devices, etc.
－
0
Turn off and on power to Bluetooth devices.
－
0
Turn down the volume of the playback device connected to the AUX connector.
－
0
Switch “H/P AMP Gain” to “High” if using headphones with high impedance or low sensitivity. 51
Sound is interrupted during
playback of music from a
computer.
0
During playback of music from the computer, do not run any applications other than the player software.
－
o
Desired sound does not come out
Symptom Cause / Solution Page
No sound comes out of a
specific speaker.
0
Check that speaker cables are properly connected. 20
0
Set the left/right volume balance using “Balance” in the setup menu. 51
The left and right of stereo
sound is reversed.
0
Check whether the left and right speakers are connected to the correct speaker terminals. 21
Set values are not reflected
in “Bass”, “Treble” and
“Balance”.
0
Set “Off” to the “Source Direct”. 51
Headphone volume is low.
0
Switch “H/P AMP Gain” to “High” if using headphones with high impedance or low sensitivity. 51
Contents Connections Playback Settings Tips Appendix
58
Front panel Display Rear panel Remote Index