Denon DN-V300 - Professional DVD Player, Инструкции по последовательному управлению

Страница: 9 / 25

９
3 Description of PC Commands
Detailed Description of Commands
Ⅰ
. External Control Commands: PC group
Detailed description of the external control commands in the PC group
1. Remote control command (RC) ---- Valid in the same way as IR remote control
<Format> [PC,RC,RC code]<CR>
(For the RC code, refer to the PC RC command control parameters on page 7.)
<Reply> [PC,RC,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details>
・
All IR remote control key operations can be controlled by serial remote.
・ Send RC codes following the “List of PC RC command control parameters”.
Example: To start playback
[PC,RC,44]<CR> → Code 44 (Play) is sent from the controller.
[PC,RC,0]
←
Error code 0 (no error) is returned from the DN-V300 and playback starts.
※
When in the power off standby mode, basically PS and PC group commands are not accepted.
The following three PC RC commands are accepted, however.
[PC,RC,12]<CR> ( DVD POWER )
[PC,RC,44]<CR> ( PLAY )
[PC,RC,66]<CR> ( OPEN/CLOSE )
2. Play title or track command ( PlayT ) ----- Valid for DVDs, CDs, and VCD/SVCD （ only when PBC off ） discs
<Format> [PC,PlayT,Title or Track No.]<CR>
<Reply> [PC,PlayT,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details>
・
For DVDs and VCDs: In the stop, play and pause modes, playback of the assigned title starts.
・
For CDs: In the stop, play and pause modes, playback of the assigned track starts. In
the pause mode, however, the player remains in the pause mode.
・ If a title or track number that does not exist on the disc is specified, error code 2 is
returned and control is not accepted.
・ For CD-R/RW discs containing MP3 files, JPEG files, etc., error code 10 is returned
and control is not accepted.
Example: To start playing title 1
[PC,PlayT,1]<CR>
→
The command to play title 1 is sent from the controller.
[PC,PlayT,0]
←
Error code 0 (no error) is returned from the DN-V300 and playback starts.
3. Play chapter command ( PlayC ) ---- Valid for DVDs and VCD/SVCD (only when PBC off) discs
<Format> [PC,PlayC,Title No.,Chapter No.]<CR>
<Reply> [PC,PlayC,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details>
・ In the stop, play and pause modes, the specified chapter of the assigned title’s chapter starts playing.
・
If a title or chapter that does not exist on the disc is specified, error code 2 is returned.
・ If a disc other than a DVD or VCD (only when PBC off) is loaded, error code 10 is
returned and control is not accepted.
・ For VCDs, title numbers are handled as track numbers, chapter numbers as entry
numbers, and the entry number is fixed to “1”.