Denon DN-V300 - Professional DVD Player, Инструкции по последовательному управлению

Страница: 12 / 25

１２
Description of PC Commands (continued)
7. SW on/off OSD setting command ( OSD ) ---- Valid when the power is on
<Format> [PC,OSD,ON or OFF]<CR>
<Reply> [PC,OSD,Error
code] (For the error codes, refer to the list of error codes on page 6.)
<Details> ・ Sets whether on or not to display the OSD and the icons that appear on the screen.
・
When the OSD is turned off, “HIDE OSD LED” lights on the front panel.
・ When the OSD is turned off, the setup and display operations, etc., are disabled.
Example: To turn the OSD off
[PC,OSD,OFF]<CR>
→
The command for turning the OSD off is sent from the controller.
[PC,OSD,0]
←
Error code 0 (no error) is returned from the DN-V300 and the setting is made.
8. SW on/off local keyboard lock setting command ( LKC ) ---- Valid when the power is on
<Format> [PC,LKC,ON or OFF]<CR>
<Reply> [PC,LKC,Error
code] (For the error codes, refer to the list of error codes on page 6.)
<Details>
・
Sets whether to lock or unlock the front panel keys.
・ When the lock is turned on, the “KEY LOCK” LED on the front panel lights.
・
When the lock is turned on, operation of all of the keys on the front panel aside from
the AC switch is disabled.
Example: To turn the key lock mode on
[PC,LKC,ON]<CR>
→
The command for turning the key lock mode on is sent from the controller.
[PC,LKC,0] ← Error code 0 (no error) is returned from the DN-V300 and the setting is made.
9. SW on/off IR remote control setting command ( RCC ) ---- Valid when the power is on
<Format> [PC,RCC,ON or OFF]<CR>
<Reply> [PC,RCC,Error code] (For the error codes, refer to the list of error codes on page 6.)
<Details>
・
Sets whether to enable or disable the infrared remote control keys.
・
When RCC is set to OFF, “IR REMOTE LOCK” lights on the front panel.
・
When RCC is set to OFF, operation of all of the keys on the remote control is disabled.
Example: To set RCC to OFF
[PC,RCC,OFF]<CR> → The command for setting RCC to OFF is sent from the controller.
[PC,RCC,0]
←
Error code 0 (no error) is returned from the DN-V300 and the setting is made.