Denon DN-M991R, Руководство по эксплуатации

Страница: 13 / 41

13
ENGLISH
PLAYBACK
PRESET FUNCTIONS AND OPERATIONS
(1) List of Preset Functions
• Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared
even when the power is turned off.
• The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher
quality playback.
• One of the preset functions can be used to display information on this set (microprocessor version).
Preset function type Description
Character display
(as set upon shipment from
factory) No.
Preset area Selection of preset area Preset Area1
Setting of whether or not to use the end monitor function and monitor time
setting
Setting of whether or not to display the EOM and display time setting
PlayLock OFF
S.xxxxD.yyyy
(xxxx yyyy is a number.)
Set information Microprocessor version display
Classification
grouping
1
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
37
38
2
3
4
5
6
AREA
Play Finish mode Play finish mode selection Finish Next
Play sound Selection of stereo or monaural playback Stereo
Auto cue Auto cue on/off setting start up level setting CueDet.OFF
Digital out Selection of digital out format D.Out Pro
End monitor End Mon.10s
E. O. M. E. O. M. 10s
Delay start Setting of delay playback start time Delay OFF
Playback speed Selection of playback speed (–8.0 % ~ +8.0 % 0.1% step) Pitch OFF
Play pitch auto Selection of whether or not to use pitch set for disc PitchAutoOFF
RECORD
Record input Selection of recording input (analog or digital) Analog IN
Stereo/Mono Stereo recording or mono recording selection Rec Stereo
Auto increment
level
Auto increment level setting IncDet.–60dB
Auto increment Auto increment selection AutoInc OFF
Pre UTOC Pre-UTOC on/off setting Pre UTOC OFF
Recording start level Recording start level setting RecLv –60dB
Recording start
offset
Recording start offset time setting RecOffsetOFF
Copy management
(SCMS)
Serial copy management on/off selection SCMS INH
Relay recording
Set the relay recording mode (on or off) and the timing for output of the REC
E.O.M. tally when the relay recording mode is on
RelayRec OFF
PANEL KEY
Next track standby
Setting of whether or not to standby at the next track when the STANDBY/CUE
button is pressed during playback
Next Stb.OFF
Play lock Selection of whether or not to inhibit the panel switches during playback
Eject lock Selection of whether or not to lock ejecting during playback EjectLockOFF
Switch protect Selection of whether or not to enable the panel switches Switch ENA
DISPLAY
Date display Date display on/off selection DateDisp OFF
Frame display Selection of whether or not to display frame FR Disp ON
PARALLEL
REMOTE
Standby tally Selection of whether to enable or inhibit the STDBY/CUE tally St.Tally ON
End cue End cue time setting EndCue –2s
Tally selection Setting of tally output signal with dry contact DryCnt E.CUE
Tally flash Setting of tally output lit or flashing T.Flash OFF
Fader start Fader start mode selection Fader Pause
SERIAL
REMOTE
Serial BPS Baud rate setting 9600bps
Player ID Player ID on/off selection and ID setting PlayerID OFF
PROGRAM
Program 1 Setting of whether or not to play program 1 Program1 OFF
Program 2 Setting of whether or not to play program 2 Program2 OFF
Program 3 Setting of whether or not to play program 3 Program3 OFF
CLEAR Preset clear Setting for clearing presets and setting them to the initial values Ini. Preset
36 HOT START Hot start Hot start mode on/off selection for parallel remote HotStart OFF
VERSION
4