Denon DN-700CB, Руководство по протоколу последовательных команд

Страница: 3 / 9

3
Introduction
Thank you for purchasing the DN-700CB. At Denon Professional, performance and reliability mean as
much to us as they do to you. That’s why we design our equipment with only one thing in mind—to
make your performance the best it can be.
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit
denonpro.com .
For additional product support, visit denonpro.com / support .
General Overview
With RS-232C serial remote control, a “host” machine such as a PC can be used to operate your DN-
700CB. Throughout this document, the equipment used to control DN-700CB will be called the
Host .
To learn more about the different types of serial communication and the code structure it requires, see
the
Communication Protocol section that starts on the next page. To the view the complete list of
serial command codes, see the Control Command Codes and Status Request Command
Codes/Status Information Codes sections later in this manual.
Connecting the Host to DN-700CB
For serial remote control, you must first connect the host to your DN-700CB. Use an RS-232C Straight
Cable (9-Pin D-Sub Male) to connect the RS-232C input on the rear panel of your DN-700CB to the
corresponding input on the host.
DN-700CB Rear Panel
Personal Computer
RS-232C Straight Cable