Storing track and time data
Pressing the
pause, search mode, you can input
the current track and time for mem-
ory data.
To enter an end track and time, press END and follow the same
procedure. Then press the STORE button to store the input data in
the memory. The cursor disappears and the MEMORY display
stops flashing.
Figure 26
Repeat above steps to store multiple sets of data. The blinking MEMORY location increases by one each time a new
set of data is stored.
CAUTION: The current digit in the TRACK display flashes if an invalid number is entered.
22
button in cue,
or
Input the minutes and seconds
digits using the same procedure as
the track number.
If you want to search the point to store in the memory
with monitoring, you may use the jog/shuttle. Turn
the jog/shuttle dial to begin searching. The frame
display appears on the LCD, and the current position
can now be monitored.
Use the number keys to input the
track number. When the digit for
the ones place is input, the cursor
moves to the tens place of the
MINUTE display.
Press the TRACK button
select the track number. The selected
track is searched and cueing to music
starts. When cueing completed, music
start time is displayed.
to
