NAMES AND FUNCTIONS
Below is a description of the functions of the controls listed on Pages 6 and 7.
FINE Buttons
Use these buttons to select the resolution of the jog
dial. When the fine mode is set the FINE indicator
appears on the display, and the pickup moves one
frame for each click of the jog dial. When the FINE
indicator is off, the pickup moves 10 frames with
each click.
Shuttle Dials
Use these dials to select the scanning direction and
speed. The disc is scanned in the forward direction
when the shuttle dial is turned clockwise from the
neutral position, and in the reverse direction when
the shuttle dial is turned counterclockwise. The
scanning speed increases as the wheel is turned
further.
Jog Dials
When these dials are turned during the search
operation, the point at which the sound is being
produced moves by a number of frames correspond-
ing to the number of clicks (1 or 10 frames per click).
A Buttons
Use these buttons to set the starting point for loop
playback. They can also be used as extra cue buttons
when not in the loop mode.
Use these buttons to select the track to be played.
CUE Buttons
Press the CUE buttons during playback to return to
the position at which playback started. The player is
ready to play when the CUE LED stops flashing,
remaining lit.
PLAY/PAUSE Buttons
Use these buttons to start playback. Press once to
start playback, once again to set the pause mode,
and once more to resume playback.
SAMPLER Buttons
Press these buttons to start recording the sample.
Press the PLAY/PAUSE button after recording to set
the sample play mode.
B Buttons
Use these buttons to set the end point for loop
playback. They can also be used as extra cue buttons
when not in the loop mode.
EXIT/RELOOP Button
Press these buttons during loop playback to stop
l oop playback and continue normal playback past
the B point (exit), or to return to loop playback for a
loop which was previously exited (reloop).
10
(2)
(1)
DN-2700F (Main Unit) Front Panel
POWER (Power Switch and Indicator)
TRACK
and TRACK
Buttons
When the POWER switch is pressed, the power turns
on and the POWER indicator lights.
Disc Holders
Place the discs in these holders. Press the OPEN/
CLOSE buttons to open and close the disc holders.
NO DISC Indicators
These indicators light when the disc holders are
open or when no discs are loaded.
CUE Indicators
These indicators flash during the cueing operation
and light solid when the unit is cued.
PLAY/PAUSE Indicators
These indicators light during playback and flash
when in the pause mode.
OPEN/CLOSE Buttons
Press these to open and close the disc holders. The
control unit also includes OPEN/CLOSE buttons. The
disc holders cannot be opened during playback, so
playback must be stopped before pressing these
buttons.
RC-37 (Control Unit) Front Panel
LCD
These liquid crystal displays (LCDs) indicate the
current track numbers, minutes, seconds, frames
and memory location numbers.
TIME Buttons
These buttons switch the time display between
elapsed time and remaining time. The selected
mode is indicated by the ELAPSED and REMAIN
indicators on the LCD.
OPEN/CLOSE Buttons
Press these to open and close the disc holders. The
main unit also includes OPEN / CLOSE buttons. The
disc holders cannot be opened during playback, so
playback must be stopped before pressing these
buttons.
CONT./SINGLE Buttons
Press these to switch between the single and
continuous play modes. The selected mode is indi-
cated by the SINGLE and CONTINUE indicators on
the LCD.
LOOP Buttons
Press these buttons to start loop
mode. The LOOP
LED is lit solid durinq loop playback.
