Denon DCD-F109, Руководство по обслуживанию

Страница: 24 / 84

24
2.3. Pickup movement
(1) In the stop mode, pickup moves in REV (inwards) or FWD (outwards) direction when
8
or
9
button pressed.
(2) When
8
button pressed, move to stop operation after detection that inner switch has turned on.
(3) Pickup movement stops when button released. (Pickup moves while button is pressed.)
• Continuous display of previous time.
2.4. Stop
(1) When
2
button is pressed, play operation and servo stop.
(2) After stopping, conduct reading of auto adjust values.
•
13
flashing
2.5. All servo on
(1) When
2
and
5
button is pressed, all servos turn on, auto adjustment is performed and switch to playback operation.
(Playback sound output)
•
13
flashing
(@@ : T.No, XX:XX : Time)
※
Press the
2
button, then press the
5
button.
NOTE : When the
2
button is pressed for over 1 second while the laser turns on and the laser current is measured.
2.6. Laser current is display
(1) When the
2
button is pressed for over 1 second while the this unit is in the stop mode ( CD TEST MODE display), the
laser turns on and the laser current is measured.
(2) The laser drive current undergoes A/D conversion for calculation. Decimal values are discarded.
(3) The first current value is measured 3 seconds after the laser turns on.
(4) The current value is updated every 3 seconds.
(5) Press the
2
button, CD test mode display reappears.
(6) Stored data is not cleared, even when the this unit is reset
•
13
flashing.
(XX : Stored data : EEPROM Stored value, YY : Current value)
q
Overwriting the stored data
(1) When the
1
/
3
button is pressed for over 5 seconds while the laser current is displayed, the current value is
stored in the EEPROM (overwriting the stored data).
(2) O nce rewriting is completed, the display in 2.6 reappears.
(3) Rewriting is performed upon shipment from the factory and when the mechanism is replaced.
@@ Tr XX:XX
S/C: XXXmA/YYYmA
LASER CURRENT
STORED
LASER CURRENT