ENGLISH
2
Getting
started
Basic connections
Basic operation
Specifi
cations
Index
Advanced connections
Advanced operations
Troubleshooting
Explanation of terms
Main features
Advanced AL32 Processing and High-precision
32bit D/A Converter
Equipped with Advanced AL32 Processing, DENON’s proprietary
analog waveform reproduction technology.
We have enhanced the reproducibility of weak signals by
expanding 16 bit digital data to 32 bit.
The player is also equipped with a high-performance, 32 bit/192
kHz-compatible D/A Converter for analog signal conversion of the
digital data expanded with Advanced AL32 Processing.
Playback of MP3 and WMA fi les
A USB port is mounted on the front panel. MP3/WMA fi les can be
played by connecting a USB Player, USB memory device. Connect
your iPod with the USB cable that came with it. Music fi les in an
iPod, USB Player or USB memory device are transmitted via digital
signal and can be enjoyed at high audio quality using the unit’s
own audio circuitry.
Cautions on handling
•
Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• When leaving home for long periods of time, be sure to unplug the
power cord from the power outlet.
•
Proper ventilation
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving the signals properly.
•
About condensation
If there is a major difference in temperature between the inside of
the unit and its surroundings, condensation may form on parts inside
the unit, causing the unit to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power off
and wait until there is little difference in temperature before using
the unit.
•
Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in use.
•
Moving the unit
Turn off the power and unplug the power cord from the power outlet.
Next, disconnect the cables connected to other system units before
moving the unit.
Loading discs
• Place the disc in the tray, label side up.
• Make sure the disc tray is fully open when inserting the disc.
• Place the discs fl at, 12 cm discs in the outer tray guide (Figure 1), 8
cm discs in the inner tray guide (Figure 2).
Figure 1
12 cm disc
8 cm disc
Figure 2
Outer tray guide
Inner tray guide
• Place 8 cm discs in the inner tray guide without using an adapter.
• “TRACK0 0m00s” is displayed if a disc that cannot be played is
loaded.
• “NO DISC” is displayed if the disc is loaded upside-down or if no
disc is loaded.
NOTE
Do not push the disc tray in by hand when the power is turned off.
Doing so could damage the unit.
Cautions on loading discs
• Only load one disc at a time. Loading two or more discs can damage
the unit or scratch the discs.
• Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or labels
is exposed or on which there are traces of where labels have been
removed. Such discs can get caught inside the player and damage it.
Discs
Discs playable on this unit
q
Super Audio CDs
Super Audio CDs with the following logos indicated below can be
played on this unit.
Multi-ch
w
Music CDs
Discs marked with the logo at right can be played in
this unit.
e
CD-R/CD-RW
NOTE
• Discs in special shapes (heart-
shaped discs, octagonal discs,
etc.) cannot be played. Do not
attempt to play them, as doing
so can damage the unit.
• Some discs and some recording formats cannot be played.
• Non-fi nalized discs cannot be played.
b
What is fi nalization?
Finalization is the process that makes recorded CD-R/CD-RW discs
playable on compatible players.
Holding discs
Do not touch the signal surface.
Getting
started
1.DCD1510AEE2_ENG_009.indd 2
2010/02/24 8:20:52
